Elmo SERVO AMPLIFIER DBP SERIES - Manual (Page 60)

59
DBP - Rev 6/93
Signals connector - J6 - cont.
Pin Function Remarks
5 Auxiliary encoder index
input
6 +5V output There are several +5V pins. The accumulative
external load should not exceed 200mA.
7 +15V output There are several +15V pins. The accumulative
external load should not exceed 100mA.
8 Circuit common
9 Home switch *
10 +5V output There are several +5V pins. The accumulative
external load should not exceed 200mA.
11 Abort input This input must be connected to high level
voltage to enable the amplifier. *
12 +5V output 200mA
13 Forward limit switch This committed input activates the #[ subroutine.
*
14 Reverse limit switch This committed input activates the #[ subroutine.
*
15 Circuit common
J1A, FAN TERMINALS - (MBA-DBP/3UE and MBA-DBP/6UE)
10 24VDC common - fan only.
11 +24VDC isolated supply for fan (max. 400mA)
* Vil<1V, Vih>2.4V, Maximum input voltage: +30VDC