Elmo SERVO AMPLIFIER DBP SERIES User Manual
Page 10

9
DBP - Rev 6/93
General
* DC output voltage is 130% of AC input voltage.
* 2KHz current loop response
* Outputs voltages of +5V/0.2A, +15V/0.1A for external use.
* Efficiency at rated current - 97%.
* Operating temperature: 0 - 50
°
C.
* Storage temperature: -10 - +70
°
C.
3.1 Digital I/O specification
Digital Inputs:
High/Low input definition: Vil<1V, Vih>2.4V
Maximum input voltage: 30V
Input impedance: 3-7Kohm
Input hysteresis: typ 1V.
When left open: low level.
Input threshold level can be shifted on request.
The fast inputs capture events (input voltage level
going from low to high) of less then 10
µ
sec duration.
Digital Outputs:
High/Low output definition: Vol<0.4V, Voh>4V
Output level: 0-5V
Recommended output current: Iol=Ioh=5mA
Maximum output current +10mA
The outputs are normally at low level.