TA Triumph-Adler P-4030i MFP User Manual
Page 369
10-21
Troubleshooting > Troubleshooting
S
Message
Checkpoints
Corrective Actions
Reference
Page
Scanner memory is
full.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to
—
Scanning cannot be performed due
to insufficient memory of scanner.
Only one copy of the scanned
pages is available. Press [Continue]
to print, send or store the scanned
pages. Press [Cancel] to cancel the
printing job.
The machine may reproduce the
same originals by arranging the
following settings:
•
Reduce the number of originals
to be scanned at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
•
Select [Copy Priority] of Optional
Memory in System Menu.
NOTE
Before changing the Optional
Memory setting, contact your
administrator.
—
Send Error.
—
An error has occurred during
transmission. The job is canceled.
Press [End].
Refer to
for the error code and corrective
actions.
SSD error.
—
An error has occurred on SSD. Job
is canceled. Press [End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into
smaller files. If the error occurs after
the file is divided, the specified file
may be damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data.
05: The specified file may be
deleted.
—
System error.
—
System error has occurred. Follow
the instructions on the screen.
—