TA Triumph-Adler DC 2242 - Manual (Page 77)

FAX Operation (Advanced)
4-14 OPERATION GUIDE
2 Press [Device/Communication], and then
[Manual RX]. Reception will start.
NOTE: When using a telephone set that can send
tone signals, use the telephone to start the
reception of originals with the remote switch
function. (Refer to Remote Switch Function on
page 4-15.)
When you hear a voice from the receiving
system
The telephone line has connected to the telephone
of the sending system. When the conversation is
over, follow steps 1 to 2 above.
After the sending system has started transmission,
the machine starts receiving originals.
4 When reception starts (when the Receive indicator
on the operation panel starts blinking), return the
handset to its original position.
Overwriting...
Scanner
Ready.
Printer
Not connected.
Removable Memory
Hard Disk
Format Remove
Line Off Manual RX
FAX Port 1
Log FAX Check New FAX i-FAX
FAX Port 2
Line Off
08/08/2009 10:10 Status
Printing Jobs Sending Jobs Storing Jobs Device/
Communication
Paper/Supplies
Status
Dialing... Receiving...
Ready.