TA Triumph-Adler DC 2242 - Manual (Page 46)

FAX Operation (Basic)
OPERATION GUIDE 3-19
3
12 Press [Password] and enter the sub address
password using the numeric keys.
NOTE: You can use up to 20 digits including the
numbers from 0 to 9, ‘ (space)’, ‘#’ and ‘*’ characters to
enter a sub address password. When the machine
receives originals, a sub address password is not used.
13 Press [OK].
14 Press [Change] of Encryption Key No. If you are
not using encryption, go to step 19.
15 Press [On], and select Encryption Key No.
NOTE: Register the encryption key in advance. For
details, refer to Registering an Encryption Key on
page 6-25.
16 To specify the FAX Box of the receiving system,
press [Encryption Box], and go to the next step.
To print originals in the receiving system, select
[Off], press [OK], and go to Step 19.
17 Press [On], and enter the encryption FAX Box
number (four digits) with the numeric keys, and
press [OK].
18 Press [OK].
19 If necessary, press [TX Start Speed] and [ECM] to
change the settings. Press [Change] of each key to
change the settings, and press [OK].
Cancel OK
FAX No. Entry - Encrypted Transmission
Off
On
Off
Key 01
1/1
Encryption
Box
Encryption Key No.
08/08/2009 10:10 Status
Key 04
Key 05
Key 03
Key 02
Ready to send.
Key Description
TX Start Speed To change the transmission start speed, press
this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.
ECM ECM (error correction mode) is a function to
automatically resend an image that has not
been correctly sent or received due to the
effects of noise on the telephone line during
transmission. To change the ECM
communication setting, press this key.