TA Triumph-Adler DC 2242 - Manual (Page 61)

FAX Operation (Basic)
3-34 OPERATION GUIDE
Previewing Images
You can display a preview image of a scanned original on the panel to check the image to be sent.
1 Prepare to send the image as described in steps 1
to 6 in Automatic Send on page 3-4.
2 Press [Preview] on the left side of the [Quick
Setup], [Type of Original/Transmission], [Color/
Image Quality] or [Advanced Setup] screen.
The machine scans the original and displays a
preview image.
NOTE: If the transmission functions below are
modified, the results are applied in the preview
image. For more information on the transmission
functions, refer to Automatic Send on page 3-4 or
FAX Operation (Advanced) on page 4-1.
If you have placed a multiple-page original in the
optional document processor, the machine scans
all the originals but only the first page is previewed.
You cannot change the transmission functions
while the preview image is displayed.
3 Press the Start key to send the fax. Transmission
begins.
To change any of the transmission functions, press
the Stop key or press [Cancel]. The preview image
disappears and the destination is cancelled. To see
the preview again, make the transmission function
changes and select the destination.
Destination
Zoom Centering Border Erase FAX Delayed
Transmission
Continuous
Scan Job Finish
Notice File Name
Entry E-mail
Subject/Body
FAX Direct
Transmission FAX
Polling RX Send and
Print
Press Start key to start sending.
Press [Cancel] to change settings.
1/2
08/08/2009 10:10 Status
Sending Image
Cancel
Original
Zoom
Send
:
:
: 100%
Destinat on Quick Setup Original/Sending
Data Format
Image Quality Advanced
Setup
i-FAX
Subject/Body
A4
A4
• Scan Resolution
• Scan Density
• Original Size
Selection
• Sending Size
Selection
• Zoom
• Original Orientation
• Selection of Image
Quality
• Border Erase
• Color Selection