TA Triumph-Adler DC 2242 - Manual (Page 161)

Setup and Registration
6-28 OPERATION GUIDE
Operation at the Receiving System
To conduct encryption communication operating the receiving system, follow the steps below.
NOTE: In encryption communication, sub address communication cannot be used.
1 Register the encryption key you have arranged with
the sending system. (Refer to Registering an
Encryption Key on page 6-25.)
2 Press the System Menu key.
3 Press [FAX], [Next] of Reception and [Change] of
Encrypted Reception.
4 Press [On], select the encryption key number and
press [OK].
5 The sending system conducts encrypted
transmission. When encryption communication is
conducted normally, the machine decrypts the
encrypted originals received and prints the
originals.
Status
FAX - Encrypted Reception
OK
08/08/2009 10:10
Encryption Key No.
Off
1/2
On
Cancel
Key 01
Key 02
Key 03
Key 04
Key 05