TA Triumph-Adler DC 2242 - Manual (Page 23)

Preparation Before Use
2-2 OPERATION GUIDE
Selection of Telephone Line (Inch version only)
Select the telephone line according to the type you are contracted with. Please note that selecting a wrong
telephone line will prevent you from sending fax.
NOTE: If you install 2 optional FAX Kits (Dual FAX option) and then use 2 phone lines, select the option for
each line.
1 Press the System Menu key.
2 Press [FAX], [Next] of Transmission, [Next] of FAX,
and then [Change] of Dialing Mode (Port 1) or
Dialing Mode (Port 2).
3 According to the type of telephone line you are
contracted with, press [Tone (DTMF)] or [Pulse
(10PPS)].
4 Press [OK].
FAX - FAX Port 1
Cancel OK
Set FAX port.
Pulse(10PPS) Tone(DTMF)
10/10/2008 10:10 Status