TA Triumph-Adler DC 2216 - Manual (Page 87)

System Setting
OPERATION GUIDE 5-15
NOTE: The range of selection will vary in accordance with the number of
cassettes installed.
5 Press [OK]. The display will return to that of Step 2.
Auto Cassette Switching
When the optional Paper Feeder has been installed, select whether or not
to use the Auto Cassette Switching function.
1 Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press U or V to display
17.AutoCassetSet .
3 Press [OK].
4 Press U or V and select Disting. paper when the Auto Cassette
Switching function is to be used and Not dist. paper when it will not
be used.
5 Press [OK]. The display will return to that of Step 2.
Auto Sizing
Sets whether or not to use automatic sizing (zoom/reduction percentage)
when a paper cassette has been selected.
1 Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press
U or V to display
18.PriorAutoZoom .
3 Press [OK].
4 Press
U or V and select On when the Automatic Sizing function is to be
used and Off when copies are to be taken at a 1:1 ratio.
5 Press [OK]. The display will return to that of Step 2.
Inputting Custom Sizes
Sizes that are not displayed on the Operation Panel are registered as
Custom Sizes.
System Menu:
17.AutoCassetSet
System Menu:
18.PriorAutoZoom