System menu operations procedures, System menu operations procedures -7 – TA Triumph-Adler DC 2216 User Manual
Page 79
System Setting
OPERATION GUIDE
5-7
System Menu Operations Procedures
Follow the procedure listed below to operate in the System Menu.
1
Press [Exposure Adjustment] on both
sides for 3 seconds. System Menu will be
displayed.
2
Press
U or V and select System Menu Items.
NOTE:
Each of System Menu Items can be selected by pressing the
numeric keys.
Refer to "Procedure for Changing the Default Settings" regarding the
following.
3
After completing each operation, press
U or V to display 00.Setting
done
.
The Auto Sleep mode will be entered after a set
period of time has passed after the final copy has
been produced or during which no operations have
been performed.
If the Auto Sleep function interferes with your copy
operations, disable the function. Before disabling the
Auto Sleep function, you may want to try lengthening
the amount of time before the Auto Sleep function
engages (Sleep Mode Transition Time).
On: Enabled*
Off: Disabled
Sets the time interval prior to the automatic operation
of the Auto Clear function when On (Enable) has
been selected as the 50.Auto Clear setting.
This will not be displayed when 50.Auto Clear is set
to Off.
10 to 270 (10-second
units) (*90)
Sets the time interval prior to the automatic
engagement of the Low Power mode after copy
operations have been completed.
1, 5, 15, 30, 45, 60, 90,
120, 180, 240 (minutes)
(*15)
Sets the time interval prior to the automatic operation
of the Auto Sleep function when On (Enable) has
been selected as the 51.Auto Sleep setting.
This will not be displayed when 51.Auto Sleep is set
to Off.
1, 5, 15, 30, 45, 60, 90,
120, 180, 240 (minutes)
(*30)
The Alarm can be set to sound when a key on the
Operation Panel is pressed or in cases when errors
occur, etc.
On: Enabled (sound
alarm)*
Off: Disabled (no alarm)
Prints out a report that shows the number of copies
made and the average amount of toner used
(blackness ratio %) for each paper size.
---
System Menu
Items
Description
Available settings
Reference
Page
System Menu:
00.Setting done