TA Triumph-Adler DC 2075 - Manual (Page 29)

Section 3 PREPARATIONS
3-9
2 Turn the new toner bottle upside down and tap the bottom
portion about 10 times or so.
3 Hold the bottle firmly and shake up the contents by turning it
upside down and then right-side up 10 or more times in the
manner shown in the illustration.
4 Next, hold the bottle horizontally and shake it back and forth
10 or more times.
5 Fit the hole in the toner bottle (located below the N) over the
metal pin (shown as 1 in the illustration) that is protruding out
of the toner supply slot.
Add toner when “Add toner” is displayed. Although a few copies can
still be made once this message is displayed, you should add toner as
soon as possible.
* DO NOT add toner unless this message is displayed.
* Touch the “Adding toner” key to have the procedure for adding toner
displayed on the touch panel.
Inch specifications
Adding
toner
Combine
AMS
Reduce
/Enlarge
Orig.image
quality
Reduce
/Enlarge
Exposure
mode
Auto
Exposure
Ready to copy. Set Paper Size
Sort/
Finished
Sort:Off
Sort:On
Basic User choice Program Function
Add toner.
11x8 1 / 2 "
APS
Bypass
Plain
Plain
Colour Plain
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
Metric specifications
Adding
toner
Merge copy
AMS
Reduce/
Enlarge
Image
quality
Reduce/
Enlarge
Exposure
mode
Auto
Exposure
Set Paper Size
Sort/
Finished
Sort:Off
Sort:On
Basic User choice Program Function
Ready to copy.
Add toner.
APS
Bypass
Plain
Plain
Color Plain
1 Open the cover on the right side of the operation panel.
3. Adding toner
CAUTION
DO NOT attempt to incinerate the toner bottle or the
waste toner box. Dangerous sparks may cause
burns.
CAUTION
DO NOT attempt to force open or destroy the toner
bottle or the waste toner box.
1