TA Triumph-Adler DC 2075 - Manual (Page 246)

Section 9 TROUBLESHOOTING
9-16
13 Close the left and front covers to the copier.
14 Reattach the copy eject tray.
If necessary, reattach the Document Finisher to the copier.
Then, push the release lever back into in its original position
and close the front cover to the Document Finisher.
9 Remove any jammed paper without tearing it.
* If the paper does happen to tear, remove any loose scraps
from inside the copier.
10 Close the cover to the fixing unit.
11 Replace the paper conveyor unit in its original position in the
copier.
12 Push the green release lever back up to its original position.
3
2
1