TA Triumph-Adler DC 2075 - Manual (Page 116)

Section 5 OTHER CONVENIENT FUNCTIONS
5-70
% Selecting the location of copy ejection
If the optional Document Finisher or Multi Job Tray is installed on your
copier, this procedure lets you select the location for the ejection of
finished copies.
1 Touch the “Edit” key. Then, in the resulting screen, touch the
“Select of Output” key. The “Select of Output” screen will be
displayed.
Inch specifications
Border
Erase
Auto
Tray A
Modify
Copy Select
orig.size
Select of
Output
None
Page # Margin/
Centering
None
Off Off
2 sided copy-Left
Finished page # : 0
Basic Quality Edit
Job Build - Step1 End
Insert page
Ready to Job build.
Place originals then press Start key.
Set
Print from
Rear page
Metric specifications
Erase
Mode
Auto None Off
Tray A
Modify
copy
Select of
Output
Select
size orig.
None None
Page
numbering Margin/
Imag.shift
2-sided Copy-Left
Finished page #: 0
Basic Quality Edit
Job Build - Step1 End
Ready to Job build.
Set original. Press Start key.
Set
Insert
blank page
Print from
Rear page
NOTES
• This setting will only be displayed when the optional Document
Finisher or Multi Job Tray is installed on your copier.
• The setting in regard to the location of copy ejection can only be
made in the first step of the job build mode and will apply to all
steps in the copy job.
2 Select the desired location for the ejection of finished copies.
Inch specifications
Select of Output
Tray A
Tray 1
Auto
Tray 3
Tray 4
Tray 2 Tray 5
Select proper output tray to avoid
mixing job.
You can confirm output tray with output
management.
Ready to Job build.
Place originals then press Start key.
Close Back
Set
Metric specifications
Select of Output
Tray 1
Auto
Tray 3
Tray 4
Tray 2 Tray 5
Select proper output tray to avoid
job mixing.
You can confirm output tray with output
management.
Ready to Job build.
Set original. Press Start key.
Close Back
Set
Tray A
3 Touch the “Close” key. The touch panel will return to the
screen in step 1.