TA Triumph-Adler DC 2075 - Manual (Page 160)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-20
Default setting
Copy eject location
Touch panel sound ON/
OFF
Silent mode ON/OFF
Day & time
Time difference
Changing the
management code
Auto shut-off ON/OFF
Description
Sets the location for the ejection of finished copies.
* This setting will only be displayed when the optional
Document Finisher or Multi Job Tray is installed on
your copier.
Sets whether or not the touch panel will emit a “beep”
sound each time a key is touched.
The copier can be switched to a silent mode, which
shortens the length of time that the laser data writing
motor continues to spin after each copy job is finished.
Turn the silent mode ON if the noise of the motor
bothers you in any way.
Sets the current date and time.
Sets a designated time difference.
Changes the management code that is used by the copy
manager.
IMPORTANT:
If you change the management code from its factory
default, be sure to keep some sort of record of the new
management code. If, for any reason, you forget the
registered management code, you will need to contact
your service representative.
Sets whether or not to have the auto shut-off function
automatically turn the main switch OFF a certain amount
of time after copying, or if no operation has been
performed on the copier during that time.
* If auto shut-off interferes with your copying operations,
turn this function OFF. However, it is recommended
that you try to set a longer time interval until auto shut-
off engages before you actually turn it OFF.
Available
settings
Tray A
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
On / Off
On / Off
Year: 2000-2099
Month: 1 – 12
Day: 1 – 31
Time: 00:00 – 23:59
+12:00 – -12:00
0000 – 9999
On / Off
Factory
setting
Tray A
On
Off
Year: ‘00
Month: 01
Day: 01
Time: 00:00
00:00
63 cpm copiers
: 6300
75 cpm copiers
: 7500
On
Reference
page
7-29
7-30
7-31
7-32
7-33
7-34
7-35