TA Triumph-Adler DC 2075 - Manual (Page 229)

Section 8 OPTIONAL EQUIPMENT
8-9
3 Performing tandem copying
1 Turn the main switch ON to the 2 copiers that are connected
via the interface cable.
2 Make sure that both copiers have completed their warm-up
operation.
3 Touch the “Tandem Copy” key on one of the copiers. That
copier will become the main [master] machine for tandem
copying.
Inch specifications
Combine
AMS
Reduce
/Enlarge
APS
Exposure
Auto
Exposure
Ready to copy. Set Paper Size
Bypass
Color
Recycled
Plain Plain
Plain
Sort
/Finished
Sort:Off
Sort:On
Basic User choice Program Function
Orig.image
quality
Reduc
/Enlarge
Tandem
Copy
11x8 1 / 2 "
8 1 / 2 x11"
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
APS
Bypass
Plain
Plain
Color Plain
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
Metric specifications
Merge copy
AMS
Reduce/
Enlarge
APS
Image
quality
Reduce/
Enlarge
Exposure
Auto
Exposure
Ready to copy. Set Paper Size
Bypass
Color
Recycled
Plain Plain
Plain
Sort/
Finished
Sort:Off
Sort:On
Basic User choice Program Function
Tandem
Copy
APS
Bypass
Plain
Plain
Colour Plain
NOTE
The touch panel display will change as follows once the “Tandem
Copy” key is touched.
Inch specifications
Combine
AMS
Reduce
/Enlarge
APS
Exposure
Auto
Exposure
Ready to Tandem Copy. [Main] Set Paper Size
Bypass
Color
Recycled
Plain Plain
Plain
Sort
/Finished
Sort:Off
Sort:On
Basic User choice Program Function
Orig.image
quality
Reduc
/Enlarge
Tandem
Copy
11x8 1 / 2 "
8 1 / 2 x11"
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
APS
Bypass
Plain
Plain
Color Plain
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
Metric specifications
Merge copy
AMS
Reduce/
Enlarge
APS
Image
quality
Reduce/
Enlarge
Exposure
Auto
Exposure
Ready to tandem copy. [Master] Set Paper Size
Bypass
Color
Recycled
Plain Plain
Plain
Sort/
Finished
Sort:Off
Sort:On
Basic User choice Program Function
APS
Bypass
Plain
Plain
Colour Plain
Tandem
Copy
Inch specifications
Metric specifications
4 Make the desired copy mode settings, etc., in the [master]
copier.
NOTES
• Tandem copying is not available in the following cases:
. while the sub [slave] copier is in the middle of copying.
. while the main switch of the sub [slave] copier is turned OFF.
. while operation in the sub [slave] copier is stopped because
“Paper misfeed.”, “Call for service.”, or “Add toner to resume
copying” are displayed.
5 Use the [master] copier to set the number of copies to be
made.
NOTES
• Tandem copying should only be used when making at least 3 or
more copy sets.
• If the total number of copy sets to be made is an even number, the
job will be divided equally between the two copiers. If it is an odd
number, the [master] copier will make one more copier than the sub
[slave] copier.
6 Set the originals in the [master] copier.
7 Press the [Start] key on the [master] copier.