TA Triumph-Adler DC 2023 - Manual (Page 18)

15
BASIC OPERATION
1. Turn the main switch ON ( ❘ ).
● Basic copying procedure
11
2. Warm-up
At the end of warm-up, "READY TO COPY." will appear on the
message display.
* If originals are set and the Start key is pressed while the copier is
still warming up, copying will begin as soon as warm-up ends.
22
5. Paper size selection
When "APS" appears on the message display, paper of the same
size as the original is automatically selected. To copy the original's
image onto a different size paper without changing the size of the
image, press the Paper Select key for the desired size of paper, and
press the Manual key. To make copies of the same size as the
originals with images of the same size, no special settings are
required.
* Automatic paper selection can also be turned off. (See "
8 PAPER
SELECTION" on page 59.)
* A drawer (paper feed drawer) to be selected automatically can be
specified without setting any originals. (See " 9 DEFAULT
DRAWER" on page 59.)
6. Copy exposure adjustment
In the initial mode, manual exposure is the default exposure mode.
One of the Copy exposure indicators will be lit. By moving the cursor
on the exposure scale to the right, copies become darker. By moving
it to the left, copies become lighter.
* Exposure adjustment is selected from 7 or 13 levels.
(See " 2 EXPOSURE STEPS" on page 58.)
66
--11
8. Setting the number of copies
Use the numeric keys to enter the desired number of copies on the
message display. Up to 999 copies can be set.
* It is possible to lower the limit on the number of copies that can be
set at a time. (See " ! COPY LIMIT" on page 59.)
9. Starting copying
Press the Start key. If "READY TO COPY." is displayed on the
message display, copying is possible.
99
55
88