Qwhuqhwfrghv – TA Triumph-Adler FAX 970 User Manual

Page 91

6-14

Maintenance

Date en cours : 6 décembre 2000
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFK 23260964-8 36xx Sagem GB\Maintenance.fm

Code 13 - Memory full

Your fax can no longer receive since its memory is full: there are too many received unprinted
documents or too many documents in the transmission line.
Print the received documents and delete or transmit immediately the documents in the transmission
line.

Code 14 - Memory full

Received document memory full. Put the printer back in working order.

Code 15 - Unknown mailbox number

You wish to deposit a document in a subscriber’s mailbox. The mailbox number does not exist.

Code 16 - No Relay Bcst list Nr x

You requested a document relay from a remote fax but the fax has not programmed the list of
subscribers requested.

Code 17 - Unknown mailbox number

You wish to recover a document from a subscriber’s mailbox. The mailbox number does not exist.

Code 18 - Relay Bcst impossible

You requested a document relay from a remote fax which does not have the relay broadcast
function.

Code 19 - Subscriber has stopped

The communication has been stopped by your subscriber. (Example: a fax wanted to poll your fax
but there is no document deposited).

Code 1A - Disconnected

The transmission has not started. The telephone line is too busy.

Code 1B - Transmission failed

During transmission: start again.
During reception: ask your subscriber to resend the document.

,QWHUQHWFRGHV

Codes 40 and 41 - No answer from provider

The modem cannot connect to the Internet service provider. If the error always occurs, check the
supplier’s dial-up number.

Code 42 - Cannot acces provider

The service provider refuses the connection, the sercice is temporarily unavailable. if the error
always occurs, check the Internet connection parameters.

Code 43 - Transmiss. server unavailable

Cannot connect to the SMTP server for sending mail, the service is temporarily unavailable. If the
errors always occurs, check the Internet e-mail and server parameters.

Code 44 - Reception server unavailable

Cannot connect to the POP3 server for mail reception, the service is temporarily unavailable. If the
errors always occurs, check the Internet e-mail and server parameters.

Code 45 - Provider disconnected

The service is temporarily unavailable; try again later.

LIAISSE 23260966-9.book Page 14 Mercredi, 6. décembre 2000 5:45 17