TA Triumph-Adler FAX 970 - Manual (Page 15)

Installation
1-6
Op
er
a
ti
o
n
Set
ti
ng
s
Qu
ic
k u
sa
g
e
D
ir
ect
or
y
M
a
in
te
n
anc
e
Saf
et
y
Cont
en
ts
In
st
a
lla
ti
o
n
Date en cours : 8 janvier 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\ARCHIVAGE DOC\MFK 23260964-8 36xx Sagem GB\Installation.fm
• Never try to remove any secured panel or cover. The interior of the printer contains
high-voltage circuitry which creates the danger of electrical shock when exposed.
• Never try to modify the printer. Doing so creates the danger of fire or electrical shock.
• Never place any heavy objects on the power cord, pull on it or bend it. Doing so creates the
danger of fire or electrical shock.
• Always make sure the printer is not placed on the electrical cord or the communications
cables of any other electrical equipment. Also make sure that cords and cables do not get
into the printer’s mechanism. Any of these conditions create the danger of malfunction and
fire.
• Always take care so that paper clips, staples, or other small pieces of metal do not get into
the printer through its vents or other openings. Such objects create the danger of fire or elec-
trical shock.
• Do not allow water or other liquids to spill on or near the printer. Fire or electrical shock can
occur should water or liquid come into contact with the printer.
• Should liquid or any piece of metal accidently get inside the printer, immediately turn it off,
unplug the power cord, and contact your dealer. Failure to take this immediate action creates
the danger of fire or electrical shock.
• Whenever the printer emits unusually high amounts of heat, smoke, an unusual odor, or
noise, immediately turn it off, unplug it, and contact your dealer. Failure to take this imme-
diate action creates the danger of fire or electrical shock.
Caution - Be sure to locate the printer in a well-ventilated location. A minimal amount of
ozone is generated during normal operation of this printer. Because of this, an unpleasant odor
may result when the printer is used for extensive printing in a poorly ventilated area. For
comfortable, healthy, and safe operation, be sure to locate the printer in a well-ventilated area.
Installation.fm Page 6 Lundi, 8. janvier 2001 11:54 11