TA Triumph-Adler FAX 942 - Manual (Page 97)

Operation
5-27
Operation
Setting yo
ur
machine
Getting started
Directory
M
aintenance
Safety
Contents
Installation
Date en cours : 12 June 2006
C:\Documents and Settings\G092899\Bureau\En cours\UK\Operation Gb.fm
C
HARGE CODE
E
NTERING THE CHARGE CODE
The charge code is a number that is sent on-line after your correspondent’s fax machine number.
To add a charge code after entering your correspondent’s number you must press the
key. This
inserts the "+" symbol after the number and you may then type your charge code.
Example:
The charge code will always be hidden.
The maximum length that can be entered is 30 characters. When dialing, only the digits are sent
on the line. The "+" symbol inserted is not sent. In the example above, the number
97380884440123 is dialed.
If your equipment is connected to a private exchange (PABX), enter the prefix (number used by
your PABX to access the telephone network, for example 0), followed by a "/" (or pause).
When a charge code is used, the transmission reports and the machine log printout contains the
correspondent’s number followed by the charge code’s "+" symbol.
TO:
9738088444+****