TA Triumph-Adler FAX 942 - Manual (Page 49)

Setting your machine
3-13
Op
eration
Se
tting y
o
ur
mac
h
ine
Getting started
Directory
M
aintenance
Safety
Contents
Installation
Date en cours : 12 June 2006
C:\Documents and Settings\G092899\Bureau\En cours\UK\Setting your machine Gb.fm
SNTP server configuration
The terminal can automatically update its date and time when connecting to an SNTP server.
Server address
M 2541 OK - SETUP / NETWORKS / SNTP SERVER / ADDRESS
Enter the name of the SNTP server, then validate with OK.
This name can be in the form of an IP address, a DNS address or a NetBIOS name.
Server port
M 2542 OK - SETUP / NETWORKS / SNTP SERVER / PORT
Enter the server port number, then validate with OK.
The port by default is port 123.
Activating the server access
M 2543 OK - SETUP / NETWORKS / SNTP SERVER / STATE
To activate the SNTP server, select WITH in the drop-down menu then validate with OK.
Time zone
M 2544 OK - SETUP / NETWORKS / SNTP SERVER / TIME ZONE
Select the time zone where the terminal is located from the drop-down list then validate
with OK.
If you have activated the automatic summer time management (menu 212), the TIME ZONE
setting is initialised automatically.
Summer time
M 2545 OK - SETUP / NETWORKS / SNTP SERVER / SUMMER TIME
Select the appropriate time setting in the drop-down list: winter time, summer time +1 or
summer time +2, then validate with OK.
Remark: This menu is not displayed if the menu 212 is activated.