TA Triumph-Adler FAX 942 - Manual (Page 72)

5-2
Operation
Date en cours : 12 June 2006
C:\Documents and Settings\G092899\Bureau\En cours\UK\Operation Gb.fm
Caution - If you forget to position the document to be transmitted, the addressee will receive a blank
page.
Remark: Since the addressee’s number is generally on the document to be transmitted, you may also dial before position-
ing the document.
C
HOOSING THE RESOLUTION
/
CONTRAST
Resolution
You have 4 modes for document transmission.
The mode choice depends on the type of document to be transmitted:
• NORMAL mode, symbolised by Std at the bottom of the display screen. To be used for good
quality documents, without drawings or small details,
• FINE mode, symbolised by FINE at the bottom of the display screen. To be used for documents
with drawings or small characters,
• SUPER FINE mode, symbolised by SFINE at the bottom of the display screen. To be used for
documents with very fine or small character drawings,
• PHOTO mode symbolised by PHOTO at the bottom of the display screen. To be used for photo-
graphic documents.
To select the resolution mode:
Press key as many times as necessary to select the required mode. A icon on the screen
shows the current mode.
Contrast
You can set the contrast if your document is too light or too dark. If the document is light, you must
raise the contrast and if it is dark, you must reduce it.
To set the contrast:
Press as many times as necessary to choose the desired contrast, as shown by the position of
a cursor.
D
IALLING
From the directory
Dialling alphabetically
Enter the first letter of your subscriber’s name with the alphanumeric keypad, then add the
remaining letters until your subscriber’s name is complete.