Rosen Aviation 0604 Series : Rosenview VX - Manual (Page 17)

Rosen Aviation RosenView VX Technical Manual
Document Number: 100640 Revision: G
Date: 9/19/12
Template: 4.4.1.6FM1; Revision A; 31 May, 2012 Page 17 of 23
As an example, the actual transmission of the Enter button would consist of the following bit
sequence:
Table 7 Enter button bit sequence
Lead In
Period Device Code Inverted Device
Code Function Code Inverted Function
Code
d0 d1 d2 d3 d4 d5 d6 d7
1 1 1 0 0 1 1 1 d0 d1 d2 d3 d4 d5 d6 d7
0 0 0 1 1 0 0 0 f0 f1 f2 f3 f4 f5 f6 f7
0 0 0 0 1 0 1 1 f0 f1 f2 f3 f4 f5 f6 f7
1 1 1 1 0 1 0 0
Note: Within each byte transmitted, the least significant bit is transmitted first.
If you need assistance in configuring a universal remote control to work with the RosenView VX,
please contact Rosen Aviation at 541.342.3802.
4.5. Audio/Video Outputs
RosenView VX has three available video output formats and one stereo audio output.
1. Analog RGB Moving Map Output: Analog RGB connects to the 15-pin high density
connector. Analog RGB will produce the best results when using displays sized 10” or
larger.
Note: When used with Rosen Aviation bulkhead displays, a cabin controller can switch
between composite and analog RGB via the source input on the display’s external
switch controller’s connector. See the applicable display’s technical manual for specific
source input toggle information.
2. The RosenView VX resolution is set to 1024x768 by default when shipped from the
factory. The Analog RGB resolution can be changed to either 640x480 or 800x600 by
inserting a USB drive into the RosenView VX that contains a script to change the
resolution. For downloads and instructions about how to run the script, please contact
Rosen Technical Support at 541-342-3802.
3. Composite Moving Map Video Output: There is one fixed composite moving map
output.
4. Composite DVD Video Output: There is one fixed composite video output.
5. Switched Audio/Video Outputs: Two separate switched outputs can individually
toggle between AUX inputs, DVD, and the moving map. The output of each switched
output will be as shown in Table 8.
Table 8 Switched outputs
Select Video Audio
0 Moving Map AUX Audio 2
1 DVD Video DVD Audio
2 AUX Video 1 AUX Audio 1