Rosen Aviation 7004 Series : 7 inch WideScreen - Manual (Page 8)

Rosen Aviation 7” Widescreen Display
Document Number: 106211 Revision: B
Date: 04/17/14
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 8 of 31
3.1. Installing/Removing SlimLine Arm Assemblies
To install a SlimLine arm assembly, press the arm button all the way in and push straight down
on the arm into the plug body until it is secure in the base.
Figure 4 SlimLine locking arm features
To remove a SlimLine arm assembly, press the arm button in all the way and lift up on the
display/arm assembly.
3.2. Stowing a Locking Arm Display
SlimLine locking arm displays have two locking points at 0º and 180º to secure displays in a
stowed position, without disconnecting power, during taxiing, takeoff, and landing (TTL).
To stow a SlimLine locking arm display, rotate the arm to either 0º or 180 º until it locks. To
deploy a SlimLine locking arm display, press the arm button halfway and rotate the arm away
from the locked position.
Figure 5 Stowing positions for SlimLine locking arm displays
Arm button
Plug body
Arm button
Plug body
Arm rotation
locks at 0º
and 180º
Composite arm SDI arm