Base installations, Cvbs pogo base receptacles, Sdi pogo base receptacles – Rosen Aviation 7004 Series : 7 inch WideScreen User Manual
Page 12

Rosen Aviation
7” Widescreen Display
Document Number: 106211
Revision: B
Date: 04/17/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 12 of 31
3.6. Base Installations
Consult the Outline and Installation drawing to assist with the installation process. Pay close
attention to the dimensions and fastener depths required when considering installation
requirements.
The 7004 displays are compatible with the base designs, as shown below. Bases mount on
either a vertical or a horizontal surface, typically with a minimum of four screws (two per flange).
For base pinout information, refer to the display drawings on the
3.6.1. CVBS Pogo Base Receptacles
Figure 10 CVBS Pogo-style base receptacles
3.6.2. SDI Pogo Base Receptacles
Figure 11 SDI Pogo-style base receptacle
P/N 0100-041
Base Receptacle: Pogo, DB9 harness,
universal mount
P/N 0100-042
Base Receptacle: Pogo, DB9
harness, horizontal mount
SDI Pogo-style
connection
P/N 0100-344
Base Receptacle:
BNC/DB9 Harness,
SDI, RS-232, with
source select
Note: Base Receptacle
P/N 0100-342 is also
compatible with the 7004
series, but it does not
have source select.
CVBS Pogo-style
connection
P/N 0100-040
Base Receptacle: Pogo
BNC/Molex harness, universal
mount