Rosen Aviation 7004 Series : 7 inch WideScreen - Manual (Page 13)

Rosen Aviation 7” Widescreen Display
Document Number: 106211 Revision: B
Date: 04/17/14
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 13 of 31
3.6.3. CVBS Micro-D Base Receptacles
Figure 12 CVBS Micro-D-style base receptacle
3.7. Electrical Requirements
 Nominal voltage 28VDC / 0.30A
 Inrush Current 20A for 250 microseconds
 Op Voltage/Current Range 18VDC/0.45A – 32VDC/0.27A
 Max Power Consumption: 8.6 W
3.8. Pinout Connections
There are several ways to connect a personal display to an aircraft’s entertainment system. Use
the pinout descriptions on the monitor’s Outline and Installation drawing to assist in completing
the wiring connections.
Note: This display is for entertainment purposes only; connect to a non-critical power bus.
3.8.1. RS-232 Control
The SDI displays can be controlled via a cabin management system using RS-232, if an
RS-232 connection is present on the configuration. The display connects to 28VDC
aircraft power and receives video through a video distribution amplifier or directly from
video sources.
For a copy of the RS-232 External Controller Message Formats (P/N 9002934), please
contact Rosen Aviation Technical Support at 541.342.3802.
P/N 0100-002
Base Receptacle: Micro-D, DB9
harness, universal mount
P/N 0100-004
Base Receptacle: Micro-D,
DB9 harness, horizontal
mount
Micro-D-style
connection
P/N 0100-005
Base Receptacle:
Micro-D BNC/Molex harness,
universal mount