Rose Electronics QuadraVista II - Manual (Page 9)

Models
QUADRAVISTA 2 INSTALLATION AND OPERATIONS MANUAL 3
Model Description
Front Panel
Buttons
1 – 4 activate the corresponding computer port
Full Selects full screen mode
Quad Selects / switches to quad mode
(Secondary function – exit)
PiP Enables the PiP mode (picture in picture)
(Secondary function – select)
Figure 1. Front Panel Description
 Pressing both Quad and PiP buttons for longer than 1 second displays the on-screen menu system
 Pressing buttons 1 and 2 for longer than 1 second sets the output resolution to 640 x 480 @ 60Hz.
Holding buttons 1 and 2 cycles through the following video modes:
 VGA - 640 x 480 @ 60Hz
 SVGA – 800 x 600 @ 60Hz
 XGA – 1024 x 768 @ 60Hz
 UXGA – 1600 x 1200 @ 60Hz
 Preferred video resolution detected in the monitor’s EDID table
 Pressing buttons 3 and 4 for longer than 4 seconds resets the unit (video + keyboard + mouse)
Rear Panel
1 2 3 4 4 4 4
1 - Power
2 - Reset
3 - Monitor / DVI-I output (console)
4 - Four DVI-I inputs (video source)
5 - RS232 / RJ45 port
6 - USB for keyboard, mouse, touch or
trackball
(console)
7 - USB or PS2 keyboard and mouse
(computer)
8 - Four transparent high-speed USB 2.0 ports
5 6 7 7 7 7 8