Rose Electronics QuadraVista II - Manual (Page 26)

20 QUADRAVISTA 2 INSTALLATION AND OPERATIONS MANUAL
Security Levels
LEVEL 0
This is the default setting of QuadraVista 2. All settings are allowed and all functions are enabled.
LEVEL 8
Security level 8 allows you to work only on one channel (computer) in a predefined display mode (Quad, Fullscreen
or PiP mode). No settings can be changed, apart from the SECURITY menu item, where you can change the
security level.
Level 7
Same as security level 8, but only the OSD windows that show display modes and device settings.
SYSTEM
SECURITY
CONSOLE VIDEO OUTPUT/EDID
VIDEO INPUT STATUS
COMPUTER KEYBOARD/MOUSE/EDID/DDC
HELP HOTKEY/ABOUT/CONTACT
Level 6
Same as security level 7 with the following additional operations:
SYSTEM CONTROL
CONSOLE FADE
- Setting of active channel using front panel buttons, hotkeys or hotmouse
- Selecting channel with PiP button in Quad mode
- Changing the directly selectable PiP channel in PiP mode single direct
Level 5
Same as security level 6 with the following additional operations:
SYSTEM TEXT PATTERN
Level 4
Same as security level 5 with the following additional operations:
SYSTEM OSD POSITION
MODE PiP / START
CONFIGURAION RECALL
VIDEO FORMAT