Rose Electronics QuadraVista II - Manual (Page 38)

32 QUADRAVISTA 2 INSTALLATION AND OPERATIONS MANUAL
Use this function to reset the current settings of QuadraVista 2 to the factory default configuration. All four input
EDIDs are also reseted to their default values.
If necessary, save your current settings before using the DEFAULTS command. Execution of this command results
in a complete reset and reboot with factory defaults.
FACTORY DEFAULTS:
SYSTEM
HOTKEY = Multiple Hotkey / Hotkey = Ctrl + Alt
HOTMOUSE = ON / Hotmouse timeout = 5 sec.
QUAD MODE = Channel selection timeout = 5 sec.
OSD POSITION = centered
OSD LANGUAGE = English
SECURITY = None (security level = 0)
DISABLE CHANNEL = All four channels are active CONTROL = Off
MODE
PIP = Size = 15 % Zoom factor = 1
Display mode = triple Active channel = gap;
Offset from top = 0 %
Start configuration = Quad / active channel = 1
CONSOLE
VIDEO OUTPUT = auto
KEYBOARD = English
TOUCHSCREEN = Mouse emulate right click / Quad remains / PiP
switches
FADE = Off
MULTI MONITOR = Monitor 1 --> Channel 1; Monitor 2 --> Channel2;
Monitor 3 --> Channel 3; Monitor 4 --> Channel4;
VIDEO VIDEO INPUT = DVI / VGA (all channels)
BRIGHTNESS = +0 (all channels)
CONTRAST = 56 % (all channels)
HORIZ POSITION = auto (all channels)
VERT POSITION = auto (all channels)
SCREEN WIDTH = +0 (screen-width correction of all channels)
PHASE = +0 (all channels)
FORMAT Fit to screen = No (all channels)
COMPUTER MOUSE USB mouse positioning = relative (all channels)
EDID / DDC 1600x1200@60, 1920x1200@60, digital
USB DEVICE 1-4 = Off / manual switching w. warning / name: Device 1 (-4)