Rose Electronics QuadraVista II - Manual (Page 36)

30 QUADRAVISTA 2 INSTALLATION AND OPERATIONS MANUAL
START (Set start mode)
Use arrow keys to navigate in the MODE menu to the entry START and press ENTER/SELECT to open the START
window.
This feature allows you to define the start configuration, i.e. the display mode (Quad, Fullscreen, or PiP), active
channel, and PiP settings which QuadraVista 2 uses after a reset or when the system is powered up.
When the START menu is called up, the current start configuration is displayed. To modify your start configuration,
change parameters in the channel, mode, and PiP fields. Press ESC to save the new parameters and exit the
START menu.
Choose “Use current mode” to adopt the current settings as start mode. Use arrow keys to navigate to “Use current
mode” and confirm by pressing ENTER.
The factory default start mode is Quad-mode with active channel 1.
Default start screen
Example of a start screen configuration