Rose Electronics QuadraVista II - Manual (Page 19)

QUADRAVISTA 2 INSTALLATION AND OPERATIONS MANUAL 13
Activating the Hotmouse in the Quad screen mode will display a box cursor with the active channel number in the
box (see below). Moving the cursor to any quadrant and clicking on the left mouse button will switch control
(keyboard / mouse) to that channel.
Activating the Hotmouse in the PiP mode has three features;
1- Switch active full screen channels
Channel 2 Activate Channel 3
active Hotmouse, active
Move cursor to (Keyboard/
PiP 3 mouse)
Press left mouse
key
2- Move the PiP images vertically
Channel 2 Activate Release mouse
active Hotmouse, key, PiP windows
Move cursor to are in new vertical
PiP windows position
Press/hold left
mouse key, move
PiP windows
vertically
Active channel