Rose Electronics QuadraVista II - Manual (Page 11)

QUADRAVISTA 2 INSTALLATION AND OPERATIONS MANUAL 5
Product Installation
Please refer to the safety section first before proceeding with any installation or configuration of the QuadraVista 2.
Installation of the QuadraVista 2 consists of connecting the computers and KVM workstation to the unit. The
following steps can be used as a guideline for installing your QuadraVista 2. It is recommended that you locate the
QuadraVista 2 as close as possible to the computers being connected.
Installing the KVM station
Connect your KVM user station to the QuadraVista 2 as shown below. Connect a USB mouse and USB keyboard to
the corresponding USB ports on QuadraVista 2. If a PS/2 keyboard and mouse are used, a PS/2 to USB converter
must be used.
Next, connect a VGA (HD15F) or DVI monitor to the DVI-I port. If a VGA monitor is used, a VGA (HD15F) to DVI
converter cable must be used.
Figure 3. Local KVM Console Installation