Set up the i/o system – RIGOL M300 User Manual
Page 77

RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
2-29
Set Up the I/O System
Press
I/O, the display shows:
Figure 2- 27 I/O Setting Interface
Table 2- 22 Menu Description
Function
Menu
Settings
Description
LAN
Set up the LAN parameters.
GPIB
Set up the GPIB address. It ranges from
1 to 30.
USB
Check USB interface ID.
RS232
Set up the Baud Rate and Parity of the
serial communication.
Save all changes, back to a higher level
menu.
Operation introduction:
Remote control through LAN, GPIB (IEEE-488), USB and RS232
interface can be configured.
The I/O interface of GPIB, USB and RS232 only one could be used at the
same time.
See also other documents in the category RIGOL Measuring instruments:
- DS1000E (2 pages)
- DS1000E (2 pages)
- DS1000E (2 pages)
- MSO/DS4000 Series (2 pages)
- MSO/DS4000 Series (63 pages)
- MSO/DS4000 Series (45 pages)
- DS6000 Series (79 pages)
- MSO/DS4000 Series (42 pages)
- MSO/DS1000Z Series (2 pages)
- MSO/DS4000 Series (44 pages)
- MSO/DS1000Z Series (12 pages)
- MSO/DS4000 Series (66 pages)
- MSO/DS4000 Series (49 pages)
- DS6000 Series (280 pages)
- DS1000B (9 pages)
- DS1000B (152 pages)
- DS1000E (36 pages)
- DS1000B (166 pages)
- DS1000E (10 pages)
- DS1000E (137 pages)
- DS1000E (166 pages)
- MSO/DS4000 Series (16 pages)
- MSO/DS4000 Series (68 pages)
- MSO/DS2000A Series (2 pages)
- MSO/DS2000A Series (77 pages)
- MSO/DS2000A Series (317 pages)
- MSO/DS1000Z Series (72 pages)
- MSO/DS1000Z Series (8 pages)
- MSO/DS1000Z Series (270 pages)
- M300 (66 pages)
- M300 (169 pages)
- DM3058E (138 pages)
- DM3058E (47 pages)
- M300 (10 pages)
- DM3058E (192 pages)
- M300 (89 pages)
- DSA1030 (12 pages)
- DSA1030 (2 pages)
- DSA1030 (18 pages)
- DSA1030 (2 pages)
- DSA1030 (1 page)
- DSA1030 (2 pages)
- DSA1030 (5 pages)
- DSA1030 (67 pages)