RIGOL M300 - Manual (Page 112)

RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
3-8
Example 6: Temperature Sensor
Setting a sensor is the same way of setting up a temperature sensor. So it needs to
set the sensor name, sensor type, sensor physical unit, sensor reference data, and
mathematical operations.
Now, the DM3000 has already built-in a temperature sensor project “PT100ITS4W”.
With this built-in project you can use a temperature sensor convenient.
Do these steps as following:
1. Press  New to enter Sensor interface.
Figure 3- 7 Sensor Interface
2. Press Prpty, enter the property setting interface.
Figure 3- 8 Property Setting Interface.
(1). Press Name, to input the name of this sensor: SensorT.
Figure 3- 9 Input Sensor Name
(2). Press Type, to select the type of the sensor: Resistance.
Figure 3- 10 Select Sensor Type