RIGOL M300 - Manual (Page 114)

RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
3-10
When you finish inputting all the data, press and save all the changes, back to a
higher level menu.
6. Press
 Done  Apply, save all the data into the local storage, and applies
it immediately.
Figure 3- 16 Apply the Setting
7. According to the sensor type, select an appropriate connection method as
shown in Figure 1- 53 and Figure 1- 54 and start to measure.
Figure 3- 17 Temperature Measurement