RIGOL M300 - Manual (Page 107)

RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
3-3
Chapter 3 Application Examples
Example 1: Reading Statistic Functions
How to obtain the statistic of the maximum value read in the measurement.
The first reading is taken as the maximum value and being shown on the display. It
will be renewed with new maximum value sub sequentially.
Do these steps as follows:
1. To measure an AC Voltage. Connect test leads as shown in Figure 1- 10.
2. Press button, select AC Voltage measurement function. Choose an
appropriate measurement range.
3. Set the Statistic measurement function parameters.
(1). Press  Stats  Max, choose maximum value measurement.
(2). Press , save all changes, back to a higher level menu.
4. Start Statistical measurement.
(1). Press ON, turn on the Statistic measurement function.
(2). Press
, finish this setting.
5. Lead test leads into the circuit and start to measure.
Figure 3- 1 The Statistic Maximum Interface