Retrotec FanTestic Integrity (ISO) - Manual (Page 29)

rev-2014-10-27
Page 29 of 50
©Retrotec Inc. 2012

If “Enter Door fan test values” is selected, you are choosing to use the “Induced Pressures”
and “Flows” from a door fan test to calculate Equivalent Leakage Area and the results. This
method of entry is selected by default.
Alternatively, if “Enter leakage results from a previous door fan test” is selected, you are
choosing to enter an “Equivalent Leakage Area” value directly, for instance if you just want
to get an idea of what the results would be if this number were true. This is used if you
want to experiment with different leakage sizes just to see how the results vary. If this value
is entered, you do not have to enter “Induced Pressures” and “Flows” for FanTestic Integrity
software to calculate results.
3.4.1 Enter recorded data from a Door Fan test
Choose, or leave the default choice as, “Enter Door Fan test values” as the selection under “Total
Enclosure Leakage”:
And the data entry section will then look like:

“Test date”
The date the test was started is automatically filled in with the current date in YYYY-MM-DD
format

“Start time”