Retrotec FanTestic (ATTMA) - Manual (Page 20)

rev-2014-10-27
Page 20 of 58
©Retrotec Inc. 2011-2014
You must select the fan model for FanTestic to correctly compute flow results if you enter fan pressures
in the Test Data set, rather than directly entering flow values from the gauge.
Fan Serial Number (S/N):
The serial number of Retrotec door fans can be found on a gray label at the top or side of the fan. The
serial number of the fan must be entered manually, and will be read in from a previously open test
automatically when you have entered it for a previous test.
The Location data entry box will appear if there are multiple fans added:
3.2 Changing Range on the fan
The range setting for each fan is entered in each Data Set, rather than here in the equipment section,
because the fan can use any of its ranges at any time during the test. See section 5.11 for details.
3.3 Gauge Info
You must select the gauge model.
The serial number of Retrotec gauges can be found on a label on the device. The serial number can be
entered manually.
3.4 Adding multiple fan/gauge pairs
If you have a non-expired demo or Pro license, you will be able to add more than one fan/gauge pair,
and enter or collect data for both.