RISCO Group ACMS - Manual (Page 24)

ACMS Installation Manual
Uncontrolled when printed © RISCO Group 18
Repairing or Removing ACMS
You can repair or remove ACMS in case there were any defects or corrupt files during installation. To repair
ACMS, perform the following steps:
1. Go to Start
→ All Programs → Risco Axes Plus → ACMS → Repair/Remove ACMS. ACMS
InstallShield Wizard screen appears.
Or
• Go to Start → Control Panel → Add or Remove Programs. Select ACMS Client and click Change.
ACMS InstallShield Wizard screen appears.
Figure 21: Repair/Remove ACMS
2. Click Next. The Program Maintenance dialog box appears.