RISCO Group ACMS User Manual

Page 16

ACMS Installation Manual

Uncontrolled when printed

15. Replace ‘localhost’ with . Enter the server name where your RMAC Services are

currently running. For example, enter 01HW183344.

16. Enter the machine name where Error Queue is created, in the Error Queue field. The format should be

@machine address.

Note: By default, each service uses a port through which the client communicates with the server.

When you point the client application to the machine where AMAC or RMAC service is running,
ensure that you specify the port number which should be used for the communication between
Service and Client. A same port may not be used for AMAC and RMAC.

When you want to use a different port, specify the port number in the format

address> : .

17. Click Next. The Ready to Install the Program dialog box appears.

Figure 13: Ready to Install

18. Select the Create Shortcut on Desktop check box. When ACMS is completely installed, the shortcut

will appear on your desktop.

19. Click Install. The Installing ACMS Client dialog box appears.