RISCO Group ACMS - Manual (Page 20)

ACMS Installation Manual
Uncontrolled when printed © RISCO Group 14
фĂĚĚŬĞLJсΗ^ĞƌǀĞƌĞƌƚdŚƵŵďƉƌŝŶƚΗǀĂůƵĞсΗϭϬϬϳϯĐĞϭϲĐϭϴϰĨϯϵĨϵϳĐĨĚϳϭϵϯϬĂϳϴĞĨĐϬϭϯϯϱ
ϱĞΗͬх
фĂĚĚŬĞLJсΗŶƐEĂŵĞΗǀĂůƵĞсΗZ^ĞƌǀĞƌΗͬх
фĂĚĚŬĞLJсΗhƐĞĞƌƚŝĨŝĐĂƚĞΗǀĂůƵĞсΗƚƌƵĞΗͬх
фĂĚĚŬĞLJсΗůŝĞŶƚĂƐĞĚĚƌĞƐƐΗǀĂůƵĞсΗΗͬх
фĂĚĚŬĞLJсΗůŝĞŶƚWŽƌƚEŽΗǀĂůƵĞсΗϬΗͬх
фĂĚĚŬĞLJсΗKƉĞƌĂƚŝŽŶdŝŵĞKƵƚΗǀĂůƵĞсΗϯϬΗͬх
фĂĚĚŬĞLJсΗ>ŽŐZĞĨƌĞƐŚ/ŶƚĞƌǀĂůΗǀĂůƵĞсΗϱΗͬх
фĂĚĚŬĞLJсΗŶǀŝƌŽŶŵĞŶƚdLJƉĞΗǀĂůƵĞсΗϮΗͬх
фͬĂƉƉ^ĞƚƚŝŶŐƐх
6. In the above code, you need to replace the host value with a valid RMAC service location. For example
it can be:
фĂĚĚŬĞLJсΗ^ĞƌǀŝĐĞhZ>ΗǀĂůƵĞсΗŚƚƚƉ͗ͬͬϬϭŚǁϭϴϮϮϯϰ͗ϭϮϭϮϭͬZD^ĞƌǀŝĐĞͬΗͬх
Here, the machine name is where the RMAC services are currently running.
1.6 Creating Queues
After ACMS is installed, you need to ensure that the acmsclient queue is created to ensure successful
running of ACMS. To verify if the queue is created, perform the following steps:
1. Find the following in the Risco.Rsp.Ac.ACMS.UI.exe XML file.
фƉƌŽƉĞƌƚLJŶĂŵĞсΗ/ŶƉƵƚYƵĞƵĞΗǀĂůƵĞсΗĂĐŵƐĐůŝĞŶƚΗͬх
фƉƌŽƉĞƌƚLJŶĂŵĞсΗhƐĞyŵů^ĞƌŝĂůŝnjĂƚŝŽŶΗǀĂůƵĞсΗĨĂůƐĞΗͬх
фƉƌŽƉĞƌƚLJŶĂŵĞсΗEƵŵďĞƌKĨtŽƌŬĞƌdŚƌĞĂĚƐΗǀĂůƵĞсΗϭΗͬх
фƉƌŽƉĞƌƚLJŶĂŵĞсΗ/ƐdƌĂŶƐĂĐƚŝŽŶĂůΗǀĂůƵĞсΗĨĂůƐĞΗͬх
фƉƌŽƉĞƌƚLJŶĂŵĞсΗWƵƌŐĞKŶ^ƚĂƌƚƵƉΗǀĂůƵĞсΗĨĂůƐĞΗͬх
фƉƌŽƉĞƌƚLJŶĂŵĞсΗƌƌŽƌYƵĞƵĞΗǀĂůƵĞсΗĞƌƌŽƌΗͬх
If the input queue value is displayed as
acmsclient, then you need to ensure that the acmsclient queue is created.
To create a queue, perform the following steps:
1. Go to Start → My Computer right-click → Manage. The Computer Management screen appears.