Precision Digital PD554 - Manual (Page 48)

Panel
Mounting Bracket
Do not excessively tighten the mounting bracket screws. Excessive tightening may lead to
controller or panel damage. !
CAUTION
7.2 Panel Mounting
PD556
PD550
PD558 PD554
Panel
Mounting Bracket
Panel
Mounting Bracket
Installation Steps
1. Cut the mounting panel. (Refer to 7.1 Dimensions and Panel Cutouts)
2. Insert the controller through the front of the panel rear terminals first.
3. On applicable models, attach the right and left mounting bracket and secure it to the panel.
4. On 1/16 DIN controller models, slide the mounting bracket onto the back of the controller as shown, and slide it
forward on the controller until the bracket locks in place, and the controller is secure.
PD550 Series Nova Programmable Process and Temperature Controller Instruction Manual
48