Oki MC363dn User Manual
Page 91
Advanced network settings > 91
(1) When WPA2-PSK is selected:
a) When WPA2-PSK is selected, Encryption type and Pre Shared Key are
displayed.
b) In Pre Shared Key, enter the same KEY as the Pre Shared KEY set for the
wireless AP that you want to connect to.
(2) When WPA2-EAP is selected:
a) When WPA2-EAP is selected, Encryption type is displayed.
7.
When all of the settings for basic settings and security settings are completed, press
the Send button at the bottom left of the Web screen, and the settings are reflected.
It may take up to a minute to connect to the wireless AP. If the connection fails, either
reconfigure the wireless settings from the operation panel, or switch to wired LAN
from the operation panel, and reconfigure the wireless settings from the Web.
MEMO
After entering the KEY, the key is displayed as "*" symbols for security reasons.