Oki MC363dn - Manual (Page 50)

Configuring the Scan to Computer and Remote Scan > 50
U
SEFUL
F
UNCTIONS FOR
S
CAN TO
C
OMPUTER AND
R
EMOTE
S
CAN
This section explains useful functions for Scan to Computer and Remote Scan.
S
ETTING
PC S
CAN
M
ODE
You can select either simple scan mode, manual scan mode or secure scan mode for Scan
to Computer function.
1.
Press the SETTING key.
2. Press the to select Admin Setup and then press OK.
3. Enter the administrator password.
4. Select Enter and then press OK.
5. Press the to select Scanner Setup and then press OK.
6. Press the to select PC Scan Mode and then press OK.
7. Press the to select a mode and then press OK.
8. Press the until the top screen appears.
E NABLING THE N ETWORK TWAIN S ETTINGS
Do the following procedure to use Scan to the Computer and Remote Scan functions
connecting to network.
1. Press the SETTING key.
2. Press the to select Admin Setup and then press OK.
3. Enter the administrator password.
4. Select Enter and then press OK.
5. Press the to select Scanner Setup and then press OK.
6. Press the to select TWAIN Setup and then press OK.
7. Check that Network TWAIN is selected and then press OK.
8. Press the to select ON and then press OK.
9. Press the until the top screen appears.
E
NABLING THE
WSD S
CAN
To use both the Scan To Computer (WSD Scan) function and the Remote Scan (WSD Scan)
function via the WSD Scan connection, follow the steps below.
1.
Press the SETTING key.
2. Press the to select Admin Setup and then press OK.
MEMO
To enter the Admin Setup menu, a password is necessary. The default
password is “999999".
NOTE
If you select Disable on this function, you cannot use scan to Computer and
Remote Scan via network.