Oki MC363dn - Manual (Page 77)

Advanced network settings > 77
P
RINTER TRAP
ITEM DEFAULT
VALUE DESCRIPTION
WEB
PAGE
TELNET CONFIG.
TOOL
NETWORK
SETTING
PLUG-IN
NETWORK CARD
SETUP
(WIN.) (MAC)
Printer
Trap
Commun-
ity Name Prn-Trap
Commun-
ity - - - public Sets a community name for a
printer trap up to 31 characters.
Address
1-5 TCP #1-5
Trap
Address - - - 0.0.0.0 Specifies a trap destination in
TCP/IP. You can specify up to 5
destinations.
Trap
Enable 1-5 TCP #1-5
Trap
Enable - - - Disable Specifies whether to use a
printer trap in TCP #1-5.
Printer
Reboot 1-5 TCP #1-5
Printer
Reboot
Trap - - - Disable Specifies whether to send an
SNMP message when the
machine has rebooted.
Receive
Illegal
Packet 1-5 TCP #1-5
Receive
Illegal Trap - - - Disable Specifies whether to use a trap
when a community name other
than the one set in Printer Trap
Community Name is used to
access the machine.
Online 1-5 TCP #1-5
Online
Trap - - - Disable Specifies whether to send an
SNMP message every time the
machine comes online.
Offline 1-5 TCP #1-5
Offline
Trap - - - Disable Specifies whether to send an
SNMP message every time the
machine goes offline.
Paper Out
1-5 TCP #1-5
Paper Out
Trap - - - Disable Specifies whether to send an
SNMP message when the
machine runs out of paper.
Paper Jam
1-5 TCP #1-5
Paper Jam
Trap - - - Disable Specifies whether to send an
SNMP message when the paper
jams.
Cover
Open 1-5 TCP #1-5
Cover
Open Trap - - - Disable Specifies whether to send an
SNMP message every time the
machine’s cover opens.
Printer
Error 1-5 TCP #1-5
Printer
Error Trap - - - Disable Specifies whether to send an
SNMP message when an error
occurs.
IPX IPX Trap
Address/
Net - - - 000000000
000;
00000000 Specifies a trap destination in
IPX. Specify the value as
“(network address):(node
address)”. You can specify only
one address.
IPX Trap
Enable IPX Trap
Enable - - - Disable Specifies whether to use a
printer trap in IPX.
IPX Printer
Reboot - - - - Disable Specifies whether to send an
SNMP message when the
machine has rebooted.