beautypg.com

Other operations, Initializing network settings, Using dhcp – Oki MC363dn User Manual

Page 108: Configuring dhcp server, Dhcp, Ther, Operations

background image

Other operations > 108

O

THER

OPERATIONS

This section explains how to initialize the network settings and how to setup your machine

and computer to use DHCP.

I

NITIALIZING

NETWORK

SETTINGS

1.

Press the SETTING key.

2.

Using the Down arrow key, scroll to Admin Setup and then press OK.

3.

Enter the administrator password.

4.

Select Enter and then press OK.

5.

Using the arrow keys, scroll to Network Menu and then press OK.

6.

Make sure that Network Setup is selected and then press OK.

7.

Using the arrow keys, scroll to select Factory Defaults and then press OK.

8.

Press OK.

9.

Using the arrow keys, highlight Yes to continue or No to exit and then press OK.
The machine restarts to enable the new settings.

U

SING

DHCP

You can get an IP address from the DHCP server.

C

ONFIGURING

DHCP

SERVER

DHCP assigns an IP address to each host on the TCP/IP network.

1.

Click Start > Server Manager.
If DHCP Server is already displayed, go to step

8

.

2.

Select Add Roles on the Roles Summary area.

3.

On the Add Roles Wizard, click Next.

4.

Select DHCP Server and click Next.

NOTE
This procedure initializes all the network settings.

NOTE

>

You must be authorized as the administrator.

>

If you enter a wrong IP address, the network system may go down.

>

You can also get an IP address from the BOOTP server.

NOTE

The machine must have a static IP address if you want to print via a network.
For details on how to assign a static IP address, refer to the manual of your
DHCP server.

The following OSs are supported; Windows Server 2008 R2 and Windows
Server 2008.

The following procedure uses Windows Server 2008 as an example. The

procedures and menus may differ depending on the OS you use.