Oki MC363dn - Manual (Page 42)

Configuring the Scan to Computer and Remote Scan > 42
Changing Settings (for Macintosh)
You can adjust how the document is scanned by changing the driver setting.
The following explains the setting items.
Simple Mode
You can change the settings of five registered buttons.
1.
Follow the procedure for “Starting a Scan Job (for Mac OS X)” on page 41 through
step 8.
2. Select Simple from Mode.
3. Click Settings.
A window appears.
4. Click the scan button to change the settings.
5. Click OK.
6. If you start a scan job, click the scan button.
If you want to finish the setting, click Quit.
Advanced Mode
You can adjust in detail how a document is scanned.
1.
Follow the procedure for “Starting a Scan Job (for Mac OS X)” on page 41 through
step 8.
2. Select Advanced from Mode.
3. Change the settings if necessary.
4. Click Scan to start scanning.
If you want to finish the setting, click Quit.
U
SING
WIA D
RIVER
The WIA driver does not support the network scan function. Connect the machine with the
computer via USB or WSD Scan.
The WIA driver does not support Mac OS X.
Starting a Scan Job
1. Place your document with text face up in the ADF or face down on the document
glass.
2. Press the SCAN key.
3. Press the to select Remote Scan and then press OK.
4. Start PaperPort on your computer.
MEMO
The explanations in this section use PaperPort as an example, and may differ
from the description depending on your application.
NOTE
When the "PC Scan Mode" is set to Manual Scan Mode or Secure Scan Mode,
implement steps 2 and 3.