MCZ Athos MULTIAIR - Manual (Page 36)

PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL page
36
Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
If the keypad is not touched for 7 seconds, the
remote control will automatically exit timer setting
mode and will confirm the last inserted setting.
Immediately after choosing the desired timer programme and
confirming it with key 6, you will exit the setting the menu and the
timer icon will remain on the display of the remote control with this
format:
If this icon remains on the display, it means that a timer programme is
active that includes start-ups and shutdowns over the course of a day
or week.
ATTENTION!
If the timer function is active, the icon
¥ will be on in
any operating screen
The TIMER function can be activated/deactivated
whether the stove is on or off.
SETTING OF A PERSONALIZED PROGRAMME
If one of the pre-set weekly programmes does not suit the heating
needs for your home, you can choose and combine various daily
programmes included in the memory of the remote control to create a
personalized weekly programme (called P99).
50 daily programmes can be selected , and you can select a
different programme for each day of the week.
To activate this option, proceed as described above for setting a weekly
programme, but instead of selecting one of the programmes contained
in the table of the weekly programmes (from P01 to P10) select the
programme P99.
Once you have selected programme P99 press push button 4 to enter
daily programming mode. The first day of the week will start flashing
(MO = Monday).
Use key 5 to scroll the programmes from 01 to 50 and select the
desired one, after consulting the table in paragraph 4.12. When you
carry out this type of programming, you will notice that the 24 h icon
also lights up to show that daily rather than weekly programming is
being performed.
Once the desired programme has been selected for the active day
(E.g.: 32 for the day MO = Monday), again pres button 4 to proceed
with programming of the day TU = Tuesday). Notice that as soon as
the day MO = Monday is confirmed, under MO a dash appears to
indicate that a daily programme is active for that day.
As soon as you confirm the programme for one day of the week and go
to the next day, the remote control will make selection faster by
proposing the last set programme (in this example 32) but with button
5 you can change it with another.
Proceed with this programming mode until the day SU = Sunday
If for a given day of the week you do not want to set any
programme, select programme 00 and continue with
programming. Notice that under that day there is no dash.
PROGRAM
PROGRAM
24 h
PROGRAM
24 h