MCZ Athos MULTIAIR - Manual (Page 16)

PELLET STOVES Chapter 3
INSTALLATION AND USE MANUAL page
16
Installation and assembly Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
3. INSTALLATION AND ASSEMBLY
3.1. DRAWINGS AND TECHNICAL CHARACTERISTICS
3.1.1. POLAR-NOVA mod. AIR
Ш 48
Ш 80
350
178
2
8
2
3
6
5
1
1
3
5
5
5
0
550
Technical characteristics POLAR NOVA - AIR
Overall thermal power Max. 8,8 kw / 7568 kcal/h
Overall thermal power Min. 3,3 kw / 2838 kcal/h
Yield at maximum 90.8 % (> 90%)
Yield at minimum 94.5 % (> 90%)
Temperature of exhaust smoke at maximum 170°C
Temperature of exhaust smoke at minimum 70°C
CO at 13%O
²
at minimum and maximum 0.059 — 0.017%
CO
2
at minimum and maximum 3.5% – 9.4%
Mass of smoke at minimum and maximum 2.3 – 8 g/sec
Minimum draught at maximum power 0,12 mbar – 12 Pa
Minimum draught at minimum power 0,10 mbar – 10 Pa
Hopper capacity 52 lt
Fuel pellet type Pellet diameter 6-8 mm. Length range 5-30 mm
Pellet consumption per hour Min ~ 0.6 kg/h * Max. ~ 1,7 kg/h *
Operating time between re-fuelling At min~ 56 h * At max. ~ 20 h *
Heatable volume m 3 190/40 – 215/35 – 250/30 **
Combustion air inlet Ø 50 mm.
Smoke outlet Ø 80 mm.
Maximum absorbed electrical power 270 Watt
Power supply frequency and voltage 220 Volt / 50 Hz
Net weight 190 Kg.
Weight with packaging 200 Kg.
* Data that may vary depending on the type of pellets used.
**Heatable volume based on demand of cal/m
3 40-35-30 (respectively 40-35-30 Kcal/h for m 3 )
Appliance suitable for installation in a shared flue.