Epson FX-980 User Manual

Page 43

Setting Up the Printer

1-19

R4C3430

Rev. C

A5 size

CHAP1.FM

5/4/99

Pass 0

Proof Sign-off:

E.Omori

_______

Installing the printerdriver using the EPSON installation program

The installation program is on the cd-rom that came with the
printer. EPSON recommends the use of the program for the
printerdriver installation.

Note:
If you're installing the printerdriver in a Windows NT 4.0 environment,
you may need certain network rights. See your network administrator
for more information.

Follow these steps to install the printerdriver:

1. Make sure that the printer and computer are switched off.

2. Switch the PC on. Windows starts automatically.

3. Insert the CD-ROM containing the printer software into the

CD-ROM drive. The AutoPlay function of the CD-ROM drive
automatically starts the installation program on the CD-ROM.

Note:
If your system does not have a CD-ROM drive, you can make a
floppy disk version from which to install the printer software.

If the installation program does not start automatically, click
on

Start

and then on

Run

. In the Run dialog box, enter the

command

E:\START

and click on the

button.

Note:
If your CD-ROM drive has a drive letter other than "E", substitute
the appropriate letter.

The installation program starts. The subsequent procedure is
menu-driven, i.e., you can select the relevant options from a
list simply by clicking with the mouse. The remainder of the
installation is automatic and you do not need to enter any
more information.