Epson FX-980 - Manual (Page 157)

7
Troubleshooting
Troubleshooting 7-7
R4C3430
Rev. C
A5 size CHAP7.FM
5/4/99 Pass 0
R Proof Sign-off:
E.Omori _______
_______
_______
The printer does not fully eject a single sheet.
Cause What to do
Your paper is too long. Press the Load/Eject button to eject the
sheet. Make sure the page length of
your paper is within the range
specified for single-sheet paper in
Appendix C. Also check and adjust
the paper size setting in your
application or printer driver.
The optional cut-sheet feeder does not feed your single-sheet
paper properly.
Cause What to do
The cut-sheet feeder is not
installed properly. Reinstall it as described in
Appendix A, “Installing the high-
capacity or double-bin cut-sheet
feeder”.
Too many sheets are loaded
in the cut-sheet feeder. Load no more than 150 single sheets
in the high-capacity cut-sheet feeder.
See Appendix A, “Using the Optional
Cut-Sheet Feeders” for more
information.
The edge guides of the
cut-sheet feeder are not
positioned correctly. Align the left edge guide with the
arrow mark, then move the right edge
guide to match your paper’s width.
There is only one sheet left in
the bin. Load more paper in the cut-sheet
feeder.